MakerBot Replicator 2x Uživatelský manuál stáhnout pdf (Strana 17)

Page 16

Rev.2

Appendix A – STL File Export Help

Blender

1. File > Export > STL...

2. Enter Filename

3. Select location

4. Click button Export STL

Catia

The export to the STL format is only possible in the Part Design

environment.

If you want to export a complete assembly (CATProduct) as a single stl

file, you will have to convert the assembly in the Assembly Design

environment to a CATPart as follows:

1. Select the entire product tree

2. Tools > Generate CATPart from Product

3. Enter New Part number

4. do NOT check: Merge all bodies of each part in one body

5. OK

Now you can export the CATPart in the Part Design environment.

The accuracy of the STL file depends on the Display accuracy. First set

the display accuracy.

1. Tools > Options...

1. In the tree select General > Display

2. select the Performance tab

3. Under 3D Accuracy select Fixed

4. Set to 0.02 mm (0.0008 in)

5. Adjust Curves' accuracy ratio to 0.2

6. OK

2. File > Save As

3. Enter Filename

4. Select type stl

5. Save

Creo Parametric (Creo Elements/Pro, Pro/ENGINEER)

1. File > Save a Copy

2. Select type STL > OK

3. Select Coordinate System Standard

4. Check Binary

5. Set Chord Height to 0 (Pro/E changes it to the smallest

allowable value)

6. Leave Angle Control at the default

7. Enter Filename > OK

1 2 ... 12 13 14 15 16 17 18 19 20

Žádné komentáře

MakerBot Replicator 2x Uživatelský manuál Strana 17